Amada CTB400 Band Saw

FEATURES+

Anti Vibration Guide Roller
Automatic Blade Guide Setting
Automatic Wire Brush Setting
Blade Deviation Monitor
Chip Conveyor
Front and Rear Vise (Full Stroke)
Inverter Driven Variable Blade Speed
Material Separation at End of Cut
Motion Detector
Plasma Display
Re-Circulating Coolant System
Safety Interlocks
Self-Diagnostic CNC

SPECS+

Cutting Capacity – Round (diameter)	1.18″ – 16″ (30 – 430 mm)
Cutting Capcity – Rectangle (W x H)	1.18″ x 0.5″ – 16″ x 16″ (30 x 13 – 430 x 430 mm)
Blade Dimensions	15’6″ x 0.055″ x 1-1/2″ (4725 x 1.4 x 41 mm)
Blade Speed	50 – 492 ft./mn Inverter (15 – 150 m/mn Inverter)
Tension Control	Hydraulic
Blade Saw Motor	10 HP (7.5 kW)
Hydraulic Pump Motor	2 HP (1.5 kW)
Cutting Fluid Pump Motor	1/4 HP (0.18 kW)
Wire Brush Motor	1/8 HP (0.09 kW)
Power Supply Voltage	AC220?10%, 3 PH, 60 Hz (All Other Voltages Require a Transformer)
Power Requirement	16.6 kVA
Cutting Fluid Tank Capcity	60.8 gal (230 Liters)
Cutting Fluid Pump Type	Electric
Hydraulic Tank Capcity	9.2 gal (35 Liters)
Chip Disposal	Chip Conveyor
Material Index Mechanism	Shuttle Vise
Stroke	Front: 11.8″ (300 mm) Rear: 15.7″ (400 mm)
Number of Cut-Off Pieces	1-999
Machine Dimensions	89″ x 88.9″ x 90.7″ (2260 x 2257 x 2304 mm)
Table Height (Above Floor)	39.4″ (1,000 mm)
Machine Weight	9,261 lbs (4,200 kg)

MEDIA+

Please call for more information about Amada Band Saw CTB400 1 (800) 286-3624

OPTIONS+

Options for Amada Band Saws:

	AXCELA G SERIES Band Saw Blades High-performance Carbide Tipped Band Saw Blades High-quality carbide tips and the dove tail tooth shape. AXCELA makes incredible cutting speed for hard to cut material.
	BCTBR Band Saw Blade Multi Faceted Carbide Tipped Blade Designed exclusively for heat-resistant alloys, nickel-based alloys, titanium alloys, and special cast tensile steels, all with high tensile strength of over 142,000 psi. It features ultra-hard, diamond sharp carbide tipped teeth that resist low thermal conductivity and abrasion that can quickly break down conventional bi-metal type bands.
	MAGNUM HI-LO Band Saw Blade Patented Varying Tooth Height and Set M-71 Bi-metal Blade High-quality carbide tips and the dove tail tooth shape. AXCELA makes incredible cutting speed for hard to cut material.
	Hi-Lo Band Saw Blade Varying Tooth Height Design, M-42 Welded Edge The Hi-Lo blade features a high and low teeth height design and a 15-degree rake angle. The blade is ideal for cutting hard steels.
	CHIP BREAKER Band Saw Blade Patented Gullet Design Designed to reduced heat generated at increased chip load. With reduced tooth stripping and breaking this equates to the lowest possible cost per square inch of metal cutting.
	SGLB Band Saw Blade M-42 Bi-metal Blade The SGLB was designed to cover a broad range of cutting applications and to provide maximum efficiency in sawing wear-resistant tool steels. The blade’s tough M-42 cobalt edge resists heat and abrasion, while the varied pitch tooth form expands the ranges of sizes and shapes that can be sawed successfully without changing blades.
	COBALT8 Band Saw Blade Amada Modified M42 High-Speed Steel Bi-Metal Blade General-purpose blade ideal for cutting mild steel and structural steel. “Chip Curler” tooth shape and unique set pattern result in longer blade life.
	SMARTCUT BAND Band Saw Blade Thinner Blade of SGLB and Magnum Hi-Lo Thinner more than 10% from regular SGLB or Magnum Hi-Lo. Specialized Blade for PCSAW330
	PROTECTOR EX M42 Band Saw Blade Exclusive use for structural steel with M-42 Edge. Which has both strength against tooth chipping and high wear resistance. PROTECTOR EX added to the back face of the tooth tip prevents excessive cutting.
	PROTECTOR Band Saw Blade Exclusive Use for Structual Steel with M-30 Matrix Bi-metal Blade Exclusive use for structural steel. Protector provides long blade life and prevents tooth breakage, eliminating excessive tooth stripping. It can withstand the shock of interrupted cuts, allowing for heavier penetration for faster cutting rates. Protector uses a broaching style set pattern designed to eliminate pinching, which prevents the blade from binding the cut.
	MGLB Band Saw Blade General Purpose Matrix Bi-metal Blade The MGLB is best suited for cutting structural shapes, tubing and stacks of mild steel pieces. The MGLB allows band saw machines to cut a wide range of material sizes and shapes without requiring a change of blades. Its tough high-speed steel teeth resist chipping, stripping and abrasion. It can also tolerate the occasional improper speeds and feeds that are often used by inexperienced saw operators.

Description

The Amada CTB400 Band Saw fully automatic, enclosed CNC vertical band saw is developed for high production, accuracy, and economic cutting.

This band saw is a state of the art machine specifically designed to use the multifaceted Amada carbide band saw blade.

The combination of these two has achieved an excess of 95cm/min cutting rates, surface finishes in the range of 62 RMS while holding accuracy’s well within the + – 0.05/mm of diameter.

The world’s first CNC OPTIMAL CUTTING CONTROL (patent pending) presets feeds and speeds according to material specification.

This unit has 229 factory installed material specs, with 100 available for custom materials. Feeds and speeds are automatically set to achieve the most economical cutting with the highest productivity possible, while maintain noise levels below 85 decibels.

Cutting Capacity Round: 16.93″
Cutting Capacity Angular (W x H): 16.93″ x 16.93″
Saw Blade Motor: 10HP
Hydraulic Pump Motor: 2 HP
Cutting Fluid Pump: 0.24 HP
Wire Brush: 0.12 HP
Saw Blade Speed: 50-492 FT/Min
Vise Clamp Width (Front and Rear): 1.18-16.93″

Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or fill out our online info request form for more information on the Amada CTB400 Band Saw.

Amada CTB400
Band Saw